I Heart Hearts! 50% Off This Week Only

Hearts Around joins Hearts Abound.

The knit version of the Hearts Abound beanie gets an upgrade with a custom heart shaped pom pom on top. If you follow the blog you know that I am now in love with my Clover Pom Pom maker so I had to add one to this beanie.

Get the knit Hearts Around Beanie for 50% off this week only.

Use promo code: heart50 during checkout for a discount at Etsy and Ravelry. Craftsy does not have promo codes, the price there has the discount already applied.*

 

The crochet version beanie and mitts are now updated with the easier to read format and are also available for 50% off this week. Contact me if you need an updated version of a previously purchased pattern. Otherwise, get your copy now!


Use the same promo code: heart50 during checkout at Etsy and Ravelry. Craftsy already has the discount applied, so no promo code needed.

*Offer ends 4/02/2017 midnight pacific time.

#adlink
Craftsy

Advertisements

From Hate To Love With The Clover Heart Shaped Pom Pom Maker

 

I never actually hated the Clover Pom Pom Maker. I just was frustrated with it because I couldn’t get it to work correctly. I was ending up with misshapen floppy balls instead of dense beautiful hearts (see video below for the sad balls).

I finally figured out I was totally doing it wrong!

It’s actually quite easy once you understand the steps, and now I totally love it!

I made a video showing how and why I was doing it wrong and then showing how to make the super cute heart shaped pom poms step-by-step.

Have you tried this maker before? How did you like it? Let us know below.

#adlink

Get Your Cable Feet Wet With These Two New Patterns

Ready to try knit or crochet cables? These patterns are a perfect primer. They have super simple cable patterns mixed with basic stitches to make these fast and fun.

The patterns include full written instructions as well as a chart for cable portions.

Crocheted Lincoln Beanie

Get the crocheted Lincoln beanie for 50% off this week only.

Use promo code: cable50 during checkout for a discount at Etsy and Ravelry. Craftsy does not have promo codes, the price there has the discount already applied.*

 

The knit version is named the Jefferson Beanie.  As with the crochet version, it comes in multiple sizes to fit kids through adults.

And it is also 50% off this week only.

Use the same promo code: cable50 during checkout at Etsy and Ravelry. Craftsy already has the discount applied, so no promo code needed.

*Offer ends 3/26/2017 midnight pacific time.

#adlink
CreateForLess.com - Create More, Spend Less

How Do You Throw A Space Party?

You planet!

Get ready for the party with the new and improved Alien Invasion Beanies. Both are 50% off this week only!

Crochet Version

The crocheted Alien Invasion is back with new and improved formatting for easier reading. It comes in 4 sizes to fit babies through adults.

If you own it already, you can download the new version from your pattern library on your favorite site (Etsy users, please contact me for an updated version, they do not change the pattern in your library).

If you don’t own it already, get it now for 50% off this week only.

Use promo code: alien50 during checkout for discount at Etsy and Ravelry. Craftsy does not have promo codes, the price there has the discount already applied.*

If you are not sure you can handle Fair Isle Crochet. Check out my tutorial videos on the subject to see if you might like it.

Knit Version

The Alien Invasion Beanie is now available in knit! As with the crochet version, it comes in multiple sizes to fit kids through adults.

And it is also 50% off this week only.

Use the same promo code: alien50 during checkout at Etsy and Ravelry. Craftsy already has the discount applied, so no promo code needed.

*Offer ends 3/12/2017 midnight pacific time.
 
#adlink

Newbie Newsday ~ How To Get Rid Of Those Annoying Gaps In Your Work

Scroll to the bottom of the post to watch a video on this technique.

If you’ve ever worked any project in any stitch other than single crochet, you’ll know what gaps I’m talking about.

When you start each new row of a crochet project, you will perform a “turning chain”.

For example, if your project is in double crochet, the normal turning chain will be a chain 3. You make this turning chain so your row will have the proper starting height it needs to keep the entire row even. If you leave it out and just start double crocheting, your first stitch will be squashed down and not look the same as the rest.

However, that chain 3 isn’t actually worked into the first stitch, or any stitch for that matter. Instead, it sits just to the right of your first stitch. Then as normal crochet goes, you make your first double crochet in the stitch after (the 2nd stitch of the row) and you end up with this gap that results from the distance of the chain 3 to your first stitch.

My finger on the left is in one of these gaps, you can also see other gaps on the right of the work and two rows above my finger..
My finger on the left is in one of these gaps, you can also see other gaps on the right of the work and two rows above my finger.

One way some people eliminate this gap is to not count the chain 3 as your first stitch. and then go ahead and make the chain 3

They will CH 3 and double crochet in the first stitch of the row. But again, the result is not great. Now you get a bump every other row from the chain 3 being forced to stick out from the stitch that was made in the first stitch space.

You can see how the ends are very wavy looking. That is the chain 3 being forced out and creating a bump.
You can see how the ends are very wavy looking. That is the chain 3 being forced out and creating a bump.

There is a fix for both of these problems. This technique can be substituted whenever you want and for any stitch you want. The result will be a nice flat edge project with no gaps.

This technique can be substituted whenever you want and for any stitch you want (above a single crochet). The result will be a nice flat edge project with no gaps.

Look at my sides, no gaps and no waves!
Look at my sides, no gaps and no waves!

This technique is super simple and is the same for any stitch you use it for.

All you will simply do instead of making your normal turning chain, is make a super extended single chain. Let me show you.

Your first step in this technique is to take the loop on your hook and pull it out to the height of the stitch you are making. Don’t worry if it’s not the exact same height, somewhere in the ballpark will be good enough.

But, it is better to make it a little shorter than taller than the stitch you are making. This will keep it more hidden and less likely to stick out.

Pull the chain out for the normal height of whatever stitch you are working. This project is using double crochets.
Pull the chain out for the normal height of whatever stitch you are working. This project is using double crochets.

Next, secure this long loop by making a chain stitch at the top.

Just yarn over and pull through the loop to make your chain as usual.
Just yarn over and pull through the loop to make your chain as usual.

Now you have a skinny “turning chain” that will sit right next to the double crochet you will make in the first stitch.

You will make your first double crochet (or whatever stitch you are working) in the first stitch. No skipping.
You will make your first double crochet (or whatever stitch you are working) in the first stitch. No skipping.

Whether the project says that the turning chain counts as a stitch or not, when using this technique, you will make the skinny turning chain and a stitch in the first stitch you come to. That means you don’t count the skinny turning chain as a stitch. In other words, it will be ignored when counting stitches.

Here is the finished skinny turning chain and first double crochet shown together.
Here is the finished skinny turning chain and first double crochet shown together.

Now your project will have nice edges and no gaps!

Check out the video to see the technique in action.

#adlink
National Craft Month - Crafts